|
|
IHC Beaver 5014C Cutter Suction DREDGER
| Principal particulars: |
| Length overall, ladder raised |
35.10m |
| Length over pontoons, moulded |
23.50m |
| Breadth, moulded |
9.50m |
| Depth, moulded |
2.46m |
| Side pontoons, moulded |
23.50m x 2.95m x 2.46m |
| Mean draught with full bunkers approx. (standard design) |
1.50m |
| Maximum standard dredging depth |
14.00m |
| Internal diameter of suction tube |
500mm |
| Internal diameter of discharge pipes |
500mm |
| Total installed power |
1091kW (1,484hp) |
| Total dry weight approx. |
174t |
| |
| Dredgepump: |
| Power at shaft |
690kW (938hp) |
| |
| Cutter: |
| Power at shaft |
170kW (231hp) |
The NG dredgers have a catamaranshaped hull, with the engine room located at deck level. The dredgers are equipped with a single high-pressure submerged dredge pump, mounted on the ladder. This high efficiency dredge pump is directly driven by the diesel engine, via the IHC Pivoting Gearbox. The prime mover for the dredge pump is a modern computercontrolled diesel engine with low fuel consumption, and low NOx and soot emissions.
This combination results in the lowest possible costs per cubic meter of dredged material, for both cutter and wheel dredgers. The type designation of the NG IHC Beaver series relates to the diameter of the delivery pipeline, the dredging depth and the cutting tool.
This type is designated the NG IHC Beaver 5014 C.
| 50 |
- |
diameter of the delivery pipeline is 500mm |
| 14 |
- |
max. dredging depth is 14 metres |
| C |
- |
dredger is equipped with a cutter |
|
|
|
